ELEKTRISOLA - Name Plain Enamel
Description Oleoresinous varnish
Standards IEC (including the following standards) N/A
NEMA (including the following standards) N/A
UL-approval No
Diameters available 24-56
Technical values
1. Thermal values
Temperature index 20.000 h acc. to IEC 60172 105°C
Cut through temperature min. °C acc. to IEC 60851-6 4. ≥ 120°C
ELEKTRISOLA-typical values for 0.05 mm / 0.25 mm, Grade 1 N/A
Heat shock min. °C acc. to IEC 60851-6 3. ≥ 155°C
ELEKTRISOLA-typical values for 0.05 mm / 0.25 mm, Grade 1 N/A
2. Electrical values
Low voltage continuity max. acc. to IEC 60851-5 5.2 for 0.05 mm Grade 1 ≤ 25
ELEKTRISOLA-typical values for 0.05 mm Grade 1 N/A
High voltage continuity max. acc. to IEC 60851-5 5.3 for 0.25 mm Grade 1 ≤ 15
ELEKTRISOLA-typical values for 0.25 mm Grade 1 N/A
Breakdown voltage acc. IEC 60851-5 4. (at 20°C , 35% humidity)
ELEKTRISOLA-typical values (cylinder) for 0.05 mm / 0.25 mm
Decrease of breakdown voltage in % at elevated temperature
ELEKTRISOLA-typical values for 0.05 mm, Grade 1, in % at °C N/A
0.25 mm, Grade 1, in % at °C N/A
3. Mechanical values
Elongation min. acc. to IEC 60851-3 3.1 for 0.05 mm / 0.25 mm, Grade 1 ≥ 14% / ≥ 25%
ELEKTRISOLA-typical values for 0.05 mm / 0.25 mm, Grade 1 N/A
Tensile strength
ELEKTRISOLA-typical values for 0.05 mm / 0.25 mm, Grade 1 57 / 1370 cN
4. Chemical compatibility
Standard solution
Pencil hardness ac. IEC 60851-4 3. before treatment / after treatment not tested
ELEKTRISOLA-typical values before treatment / after treatment
Decrease of breakdown voltage in % after treatment
General statements about chemical compatibility are not possible due to high
number of influencing factors such as winding, impregnation moulding and cleaning
material etc.
5. Solderability
acc. to IEC 60851-4 5. max. seconds at °C for 0.05mm / 0.25mm Grade 1 not suitable
ELEKTRISOLA-typical values IEC 60851-4 5.
for 0.05 mm, Grade 1, seconds at °C
for 0.25 mm, Grade 1, seconds at °C
Properties Excellent resistance to moisture.